10K gold ring with two 12K gold leaves.  The .03 ct [TDW] diamond is set in a 12K pink gold rose.

The center width is about 7/16 of an inch.

10K gold band with 12K gold leaves on the upper ring shank.
The Marquise diamond [ 6mm x 3mm ] is about .25 ct TDW.

Approximate center width top to bottom [through the diamond and setting]:  5/16 of an inch

These two bands are designed to fit around the 4907D directly above.
10K gold with 12K gold leaves on the upper ring shanks.

Each is approximately 3/16 of an inch wide.  Price is 'per pair.'

Single band design in 10K gold.  There are four 12K gold leaves.  The see-through center channel has five diamonds.

The center diamond is .07 ct.  The two diamonds either side of the center stone are .05 ct each, and the two outside diamonds are .03 ct each.  [ .23 ct TDW ]

The center width is about 1/2 of an inch.

10K gold ring with 10K gold interlocking hearts.  A diamond chip [ .01 ct TDW ] is securely nestled between the hearts.  There are two small 12K gold leaves [ one on each side of the hearts ].

The center width top to bottom is about 1/4 of an inch.

This gorgeous, 10K gold ring may look like a two-band set, however, all the wonderful features you see are housed on a single band.  There are six 12K gold leaves and two beautiful diamonds on the upper shank.

The diamonds are .10 ct each.  [ .20 ct TDW ]

The center width top to bottom as shown is about 3/8 of an inch.

10K gold ring with a see-through upper shank.  There are two 12K gold leaves and four diamonds.  [ .05 ct each - .20 ct TDW ]

The center width top to bottom as shown is about 9/16 of an inch.

This 10K gold ring features a .03 ct [TDW] diamond, two 12K gold leaves, and two see-through hearts.

This ring is about 1/8 of an inch wide.

A single 10K gold band with twelve 12K gold leaves.
Three diamonds .02 ct each [ .06 ct TDW ]

Approximate center width: 5/16 of an inch [top to bottom]